Casting with a fishing net is interesting. Also, then again it could be challenging. However, if you know the tricks of how to cast a fishing net then it could be easier. This method needs practice and patience but once you have learned, you will become proficient at it.
How To Cast A Fishing Net: Quick Tips
Here’s a basic guide on how to cast with a fishing net:
- Hold the net: First of all, it will start by holding the net in hand with the lead line at the bottom and the float line at the top. Make sure the net is positioned downward so that it’s completely extended and the weights should be in the bottom.
- Grab the net in the Centre: Hold the net in the centre with one hand and use the other hand to gather the net in small significant folds. In this way it will look alike compact bundle of netting.
- Throw the net: Take the pack of netting in your hand which one you are ready to use and make a forward motion with arm. Formerly, swing your arm backward and throw the net as you release the netting. The net will open up and procedure a circle.
- Pull the net: Once the net has properly landed in water, let it sink to the bottom. After sinking the net, pull the float line to close the net. If the area has fishes it will trap inside automatically.
- Retrieve the net: To recover the net, pull in the float line that on your hand slowly gather the net in the direction of you. Lastly, lift the net out of the water and collect the fish in a bucket that have been caught.
Remember, practice the casting technique before fishing, and always be aware of your surrounds and environments, particularly if you’re fishing in a crowded area.
How to Cast with Fishing Net on A Boat
Casting a net from a boat is likely to casting a net from land, but there are a few additional techniques that should be in considerations to keep in mind. Here’s a general guide on how to cast a net on a boat:
- First, ensure, the boat is positioned in an area where the fish school is located. Make sure there is enough space around the boat to cast the net without hitting anything.
- After that, determine the direction of the wind speed and the current net’s drift plan, make sure the net should be spread out evenly over the area you are targeted to cover.
- Hold the net in right hand and gather the float line with other hand, making sure it’s not tangled or jammed on anything.
- Stand on the edge of the boat if the boat has proper space. If you are using canoe then you should take care of your legs before though it out.
- Using a circular motion, swing the net backward direction behind you and then forward the net. Release the lead line loop and letting go of the net at the correct moment to open it up. Wait for the net to sink into the water.
- Check the net sinks to the desired depth or land before pulling it back. After that pull it up slowly.
- Once the net is back at the boat, use a sequence of short pulls on the lead line to bring the net closer to the boat. Thus, gather up the weights and collect the fishes to the fish busket.
How to Cast with Net in Deep Water
Casting a net in deep water needs a diverse method than casting in shallow water. Follow the tips written below:
- Make sure you have prepared your net for deep water fishing. The net’s size and weight will be contingent to the depth of water for targeted fish.
- Determine the depth of the water by using fishing accessories or fish finder. And make your nets float line or lead line to the required water depth.
- After that, hold the net with both hands and gather the lead line. The net should be clear and not tangled with each another.
- Try to Stand on the edge of the boat if it is safe enough.
- Swing the net backward and through it to specific targeted location.
- Wait for sinks into the water then try to pull out slowly. Make sure it does not go in the forward moment to the water, this way fishes could make a move and chances of getting released.
- After properly pollen up open the net and collect the fishes usually.
This way you can properly cast fishes in depth water in ponds, canals and rivers as well.
Best Cast Net Sizes for Beginners
For beginners, a smaller cast net is usually easier to handle. Still, here’s a thing, the size of the net depends on which kind of fish you are looking to catch and the size of the area you’ll be casting in. Due to that, you must fix your fishing categories before buying a fishing net.
However, it will be better if a novice fisher uses a 4 to 6-foot diameter net with a 3/8-inch mesh size. This fishing size is suitable for catching small to medium-sized fishes like shad, mullet, or minnows. Besides, it is easier to use than casting with larger nets.
Once you’ve become capable at using a cast net properly, you can trial with larger fishing nets. However, you should keep in mind that larger nets can be heavyweight and difficult to throw. So, it’s best to start with a smaller net until you are properly ready to use the bigger one.
Why You Should Use Fishing Net
The purpose of a fishing net is to catch fish and aquatic animals in a bulk quantity. Fishing nets have been used for thousands of years and these are still widely used for its accuracy and workability.
Moreover, fishing nets come in several shapes and sizes, and the category is depending on the fishing method, location and fish types. Generally, fishing nets include gill nets, seine nets, cast nets, and trawl nets these will help you to use it easier.
Fishing nets are a well-organized way to catch fish in bulk quantities for the reason that they can cover a wide area of water. Besides, fishing net also need low man power than other fishing methods like angling or casting with fishing rod which requires more skill and physical effort.
However, there are some backsides on using it. Fishing nets have negative impacts on fish populations if they are used irresponsibly. Besides, overfishing, non-target species catching, and marine ecosystem damaging are the primary cons of using fishing net.
Therefore, make sure to use it properly and try to avoid breakdown the fishing populations.